Mitsubishi HF-KE43KW1-S100 AC Servo Motor 3 PHASE 400W 102V 3000RPM IP55 2.9A CIB HF SERIES NEW AND ORIGINAL GOOD PRICE

MITSUBISHI HF-KE43JW1-S100 Product information and technical parameters:
Brand: MITSUBISHI
Name: servo motor
Model: HF-KE43JW1-S100
Type: HF-KE servo motor, low inertia, low power.
Rated output power: 0.4kw.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.

KH003 special mark for Super MR-E.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of the servo amplifier, which is convenient for cable connection.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.

High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.

MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 5.0kw.
Interface type: SSCNET type III fiber communication.
Special features: integrated driver security.
Power specification: three phase AC200V.
STO function as a security feature is added to the SSCNET III fiber communication type servo amplifier MITSUBISHI HF-KE43JW1-S100.

By using the STO function, the electromagnetic contactor used in the past to prevent the motor from accidentally starting is no longer needed HF-KE43BKW1-S100
SS1 functions can be realized by using the MR-J3-D05 security logic unit.
MR-J3-BS uses a full closed loop control system.
Compatibility with MR-J3-B.
MR-J3-BS installation, wiring and connectors are the same as the MR-J3-B, so do not change the existing connection will be easy to MR-J3-B
Change to MR-J3-BS MITSUBISHI HF-KE43JW1-S100.
Security functions are connected to the CN8 interface through an external security circuit to increase the MR-J3-BS driver security.

Compatible full closed loop control system.
MR-J3-BS has a full closed loop control system version. Servo motor series: low inertia, small capacity.
Rated output: 1.5kw.
Rated speed: 2000r/min MITSUBISHI HF-KE43JW1-S100.
Electromagnetic brake: No.
Oil seal: have.
Corresponding servo amplifier: MR-JE-10B/MR-JE-10A.
Support position control, speed control, torque control, push and press control.
Position control can use linear, arc interpolation controller, fixed size feed control, target position change and other rich functions.

The position control and torque control are realized by switching control mode.
The gain adjustment of servo can be simply performed by the advanced one key tuning function.
At the same time, it is also able to suppress the low frequency vibration of the manipulator by the advanced vibration suppression control II,
Shorten the time to complete the positioning, so as to achieve the production of the rhythm of the shortening. Motor series: super low inertia, medium power.
Rated output power: 5.0kw.
Rated speed: 3000r/min.
Whether to take the brake: No.

Shaft end: Standard (straight).
Proteection level: IP65 (IP67) HF-KE43JW1-S100.
Features: ultra low inertia is suitable for high frequency operation.
Application example: ultra high frequency transmission machinery.

High resolution encoder 131072p/rev (17 bit).

The encoder with high reesolution ensures excellent performance and stability at low speed HF-KE43JW1-S100.
All motor dimensions are the same as before and all are compatible with the wiring.